Ask ScooterDad: I have a mgp scooter with IHC compression. I am getting Grit invader bars 31.8mm size. It has a starnut installed for ICS. Can I still use the bars for my IHC mgp scooter????? Please help!
Published on Thu, 04/21/2016 - 3:44pm |
ICS, IHC, Starnut |
Ask ScooterDad: MaddGear fixed handle bars...Can I really have the bar cut down? Spent some good money on this thing, but son insists bar is too high. I dont' have the tools, but do I just ask someone to lop a couple inches off? Help.
Published on Mon, 04/18/2016 - 1:48pm |
Bars |
Ask ScooterDad: so any way i have a grit fluux with a HIC and an integrated headset. I just fried my headset and i am trying to buy a new one that is sealed. i bought a lucky green. will it fit my head tube.
Published on Sun, 04/17/2016 - 6:51pm |
Grit, Fluxx, Headset |
Ask ScooterDad: Hi I would like to buy a flex fender brake but i can only afford one with 2 holes. I have one hole in my deck and i cant drill a 2nd one so could i just not use one of the bolts??. Would it work with just one ?? Thanks
Published on Fri, 04/08/2016 - 1:54pm |
Brake |
Ask ScooterDad: Hi. I have a complete fasen Raven. Will standard scs bars work fine with a IHC compression system?
Published on Thu, 04/07/2016 - 9:12pm |
IHC, Bars |
Ask ScooterDad: I have a mgp vx5 extreme complete. It has oversised bars and i want to change go stamdad Apex bol bars. Will it fit/work? If not what do i do?
Published on Sun, 04/03/2016 - 6:43pm |
Apex, HIC, IHC, SCS |
Ask ScooterDad: I am buying HiC bars but i have IHC forks, do i need to get new forks as mine came with envy kos 2013 complete or can i just put the bars on the IHC forks as is
Published on Fri, 04/01/2016 - 2:49am |
IHC, HIC, SCS |
Ask ScooterDad: I have just bought some oversized bars and I wanted to know if it's possible to put the oversized bars on a regular mgp fork
Published on Sun, 03/27/2016 - 2:47pm |
HIC, SCS |
Ask ScooterDad: i have hic and i want to run standard size bars what should i do
Published on Fri, 02/12/2016 - 9:15am |
IHC, HIC, Bars |
Ask ScooterDad: i have a fuzion x 3 and i was wondering is it poosible to upgrade to a hic system
Published on Mon, 01/18/2016 - 10:07am |
HIC, Fuzion |
Ask ScooterDad: How do I know which pegs will fit with my Axels?
Published on Sun, 01/10/2016 - 4:21am |
Pegs, Axles |
Ask ScooterDad: Will the district AL-2 bars fit on a fuzion pro X-3 scooter?
Published on Sat, 01/09/2016 - 10:33am |
Fuzion, Aluminum, Bars |
Ask ScooterDad: Hi i run an ao delta complete(HIC) and i want to buy the ethic almasty bar in IHC but I'm not sure if they will fit.
Published on Sat, 01/09/2016 - 12:57am |
HIC, IHC |
Ask ScooterDad: Hey I have a reventon v2 but ws considering the phoenix ion deck..is it better and/or stronger than the v2.I ride very aggressive and need strength ..thanks
Published on Thu, 01/07/2016 - 4:37pm |
Phoenix, Ion, Reventon |
Ask ScooterDad: What type of compression system is a fuzion pro X-3 scooter
Published on Mon, 01/04/2016 - 8:07pm |
Compression |
Ask ScooterDad: madd mfx deck, r willy bars with slit cut, sacrifice cyborg ihc forks, fsa headset. Bars barely move ? taken apart and 3x1mm spacers came off - whats wrong please ?
Published on Sat, 12/26/2015 - 2:07am |
Bars, Headset, Spacers |
Ask ScooterDad: I have a mgp vx4 extreme scooter. I want to fit envy reaper bars (i have hic compression). If you could tell me what to get that would be great thanks :D.
Published on Tue, 12/22/2015 - 2:09pm |
SCS, IHC, HIC, ICS, Aluminum, Bars |
Ask ScooterDad: I have a tall 13 yr old kid. He's 5-10 135lbs and has outgrown his scooter. He just started getting into doing tricks and I need to upgrade. What should I be looking at around the 150$ range?
Published on Tue, 12/01/2015 - 9:43am |
Envy, Prodigy, Dominator |
Ask ScooterDad: Can I run oversized bars on a fasen raven?
Published on Sat, 11/28/2015 - 11:25am |
Oversized, IHC, Fasen, Raven, SCS, HIC |
Ask ScooterDad: My scooter has a standard bar size IHC compressor, does this mean that I can fit any standard size bars with a slit on the Compressor?
Published on Tue, 11/03/2015 - 9:37am |
IHC, Bars |
Ask ScooterDad: I have a fasen Raven, and I would like to put on hic bars, I then discovered a ihc to hic apex kit with a clamp, however will this conversion kit work with all hic bars or only apex? Thanks
Published on Wed, 10/28/2015 - 4:15am |
Clamp, IHC, HIC, Apex |
Ask ScooterDad: Hi scooterdad what type of bars fit an ihc compression
Published on Mon, 10/26/2015 - 12:50pm |
IHC, Bars, Standard, Slit |
Ask ScooterDad: I was wondering what is the best compression system?
Published on Mon, 10/19/2015 - 8:29pm |
Compression, IHC, SCS, HIC, ICS |
Ask ScooterDad: I'm getting blunt soul bars for my fasen Raven and I'm thinking of cutting down the height of the bars, how big does the slit need to be compared to my double clamp? Thanks
Published on Sat, 10/17/2015 - 2:29am |
Clamp, Bars, Slit |
Ask ScooterDad: What do you wash your MGP scooter with
Published on Fri, 10/16/2015 - 2:45pm |
MGP, Madd Gear, Headset, Bearings, Wash |
Ask ScooterDad: how can i stop my headset from rocking
Published on Thu, 10/15/2015 - 5:31pm |
Compression, Headset |
Ask ScooterDad: Is it okay if i put an scs clamp on my hic bars? i kneed to put a longer clamp on,thats why.
Published on Thu, 10/15/2015 - 9:45am |
SCS, HIC, Bars, Clamp |
Ask ScooterDad: whats difference between abec7 and abec 9
Published on Sun, 10/11/2015 - 5:10pm |
Bearings, ABEC |
Ask ScooterDad: I have an vx5 pro and I want to switch compressions to scs what would I have to get?
Published on Sun, 10/11/2015 - 10:08am |
SCS, IHC, MGP, Madd Gear, VX5 Pro, Headset, Fork |
Ask ScooterDad: I'm getting oversized apex Bol bars for my vx5 pro and it has ihc compression what will I need to get to make the rest of my scooter
Published on Sun, 10/11/2015 - 6:13am |
Oversized, IHC, HIC, SCS, Apex, Bol, Bars, Clamp, Fork |
Ask ScooterDad: My sons scooters rear wheel is making a clicking sound when weight is applied but no sound when spinning the wheel.
Published on Sun, 10/11/2015 - 1:44am |
Bearings, Wheels, Noise, Clicking |
Ask ScooterDad: Can I fit the phoenix session 2 bars on envy cnc thread less ihc forks and fasen raven CNC threadless ihc forks? My bars have a slit in them
Published on Wed, 10/07/2015 - 1:18pm |
Phoenix Session 2, IHC, Forks, Bars, Envy, Fasen |
Ask ScooterDad: i have a razor pro xx and was wondering if i could install a threadless fork?
Published on Mon, 10/05/2015 - 1:31pm |
Razor, Pro XX, Threadless, Fork, Bars, Headset, Compression |
Ask ScooterDad: Hi I have a fasen Raven and I'm thinking of ordering oversized apex Bol bars with a pre cut slit, will I have to get a different clamp
Published on Mon, 10/05/2015 - 12:12pm |
IHC, Oversized, Bars, Fork, Fasen, Raven |
Ask ScooterDad: Why do bars need slits and what do slits really do? Are they necessary?
Published on Sat, 09/26/2015 - 4:21pm |
Bars, Slit, Clamp |
Ask ScooterDad: I'm am getting a new scooter and I was wondering which scooter to get Fasen Raven or Envy Prodigy?
Published on Fri, 09/25/2015 - 12:29am |
Envy, Fasen, Raven, Prodigy |
Ask ScooterDad: Hi, will sacrifice reo t-bars work with IHC compression? thanks :)
Published on Sat, 09/12/2015 - 5:58am |
IHC, Sacrifice, Bars, Clamp |
Ask ScooterDad: Hey, I just got back into scooters, and I bought a Razor Pro XX, bars were too short, so I got some new bars. But they didn't come with a slit in them, do I need to cut a slit in them to be able to get them to clamp?
Published on Fri, 09/11/2015 - 10:12pm |
Razor, Pro XX, Threaded, Clamp, Bars, Slit |
Ask ScooterDad: I have the madd gear vx5 team and I want to switch to scs compression, do i need new forks or do the ones that come stock work with scs.
Published on Fri, 09/11/2015 - 3:51pm |
Madd Gear, MGP, VX5, IHC, SCS, Fork |
Ask ScooterDad: i have a disrict and the head set is loos and i lost the tool to tighten it i cant find one to irder cus it is super long cus it goes up the forks and i cant even get the bolt out to see whay size where can i look or call,??
Published on Sat, 09/05/2015 - 8:46pm |
ICS, District, Compression, Headset, Allen Key, Wrench |
Ask ScooterDad: Will HIC bars fit on IHC forks?
Published on Sat, 09/05/2015 - 3:35am |
IHC, HIC, Bars, Fork, Shim |
Ask ScooterDad: Is it possible to ics compression a scooter with oversized bars? And with mgp hothead HIC forks as I have some standard sized bars if not?
Published on Fri, 09/04/2015 - 10:38am |
ICS, HIC, MGP, Madd Gear, Hothead, Fork, Compression, Bars |
Ask ScooterDad: I have Root Industry grips. They are very soft but cause some serious blisters. Is there a reason why and what grips should I get if these grips still give blisters.
Published on Thu, 09/03/2015 - 6:21pm |
Grips |
Ask ScooterDad: does the Madd Gears VX1 JAM Scooter have a hic fork
Published on Thu, 09/03/2015 - 1:34pm |
Madd Gear, MGP, Threaded, Fork, HIC, Threadless, Headset |
Ask ScooterDad: what is a good beginners scooter for a person used to a razor?
Published on Wed, 09/02/2015 - 9:35pm |
Envy, Prodigy, Razor, Beginner |
Ask ScooterDad: I have a Fasen Raven 2015 Edition. I have been told that it is a IHC compression scooter. What type of Apex Bol bars will fit on my scooter... HIC or Standard. Or will niether of these fit my scooter...?
Published on Wed, 09/02/2015 - 9:35pm |
Apex, Bol, Bars, Fasen, Raven, IHC |
Ask ScooterDad: can I get oversized bars to fit ihc compression
Published on Wed, 09/02/2015 - 7:17am |
IHC, HIC, Oversized, Bars |
Ask ScooterDad: I am getting fasen spiral bars and a proto double clamp. do I need to get rid of the slit on bars to get it to fit?
Published on Tue, 09/01/2015 - 10:38pm |
SCS, HIC, ICS, IHC, Bars |
Ask ScooterDad: Hi, I want to buy an AO delta deck and I have sacrifice cyborg ihc forks with A headset I don't know what size bearing. So my question is will my ihc forks and bearings fit on an AO delta deck?
Published on Thu, 08/27/2015 - 3:51pm |
Integrated, Headset |
Ask ScooterDad: Will my lucky steely brake fit on a reventon v2
Published on Tue, 08/25/2015 - 7:14pm |
Brake, Lucky, Phoenix |
Ask ScooterDad: I have a grit fluxx 2014 scooter with blazer pro quad clamp, blunt declare forks and an eco anodized threadless headset what do i need to run ihc compression
Published on Fri, 08/21/2015 - 12:38pm |
IHC, Bars, Clamp, Fork |
Ask ScooterDad: Hello, If i got some Envy KOS Soul bars, would they fit Fasen Raven IHC forks?
Published on Fri, 08/21/2015 - 12:51am |
Bars, Fork, IHC |
Ask ScooterDad: When I tighten my mgp hic and clamp up tight my bars still move around with out the forks following?
Published on Tue, 08/18/2015 - 3:03am |
HIC, Clamp, Bars |
Review: Chilli Pro 5200/50 cm SCS Complete Scooter
Published on Sun, 08/16/2015 - 9:21pm |
Chilli, Pro 5200/50 cm SCS, Complete, Scooter, Review, SCS, Integrated |
Ask ScooterDad: In running ihc set up but need new bars what do i need inorder to use hic bars on my ihc compression do i need a shim or new clamp or what? Thx in advance
Published on Fri, 08/14/2015 - 12:21am |
IHC, HIC, Bars, Fork, Clamp |
Ask ScooterDad: I had a 115 complete sacrifice and brought a max peters deck it all fits fine but i want new bars what do i need i have ihc compression but what type of bars work and what would i need to make it work
Published on Thu, 08/13/2015 - 4:02am |
IHC |
Ask ScooterDad: Hi kenny, I have something ( I'm pretty sure it's a twig or seed pod) rattling around in my deck. Any idea what to do?
Published on Tue, 08/11/2015 - 11:11pm |
Deck, Foreign Body |
Ask ScooterDad: Hi kenny, I am looking into buying a Proto SCS clamp and was wondering if my parts were compatible with it. I have a district DK2 deck, FK2 fork, District integrated headset, and Al2 bars. Thanks Calcin
Published on Thu, 08/06/2015 - 9:44pm |
SCS, ICS, Fork, Bars, Distrct FK2, District AL2, Proto |
Ask ScooterDad: Should I add fails into my scooter edit? please explain
Published on Thu, 08/06/2015 - 10:47am |
Video, Filming, Editing, Falls |
Ask ScooterDad: If i get envy thermal bars with a slit cut in them will they fit ihc fasen raven forks?
Published on Thu, 08/06/2015 - 12:20am |
IHC, Envy Thermal, Bars, Fasen Raven |
Ask ScooterDad: Hey Kenny, I've got a new scooterer (almost 4yo) and we're buying a helmet for him. What's better: a 'bike' helmet or a 'skate' helmet. Why is one better than the other?
Published on Fri, 07/31/2015 - 7:46pm |
Helmet |
Ask ScooterDad: If i want to ride envy reapers would they fit HIC if they had a slit?
Published on Fri, 07/17/2015 - 10:52pm |
HIC, IHC, SCS, Reaper Bars, Bars, Compression |
Ask ScooterDad: can you use scs on ihc forks
Published on Mon, 07/13/2015 - 12:50am |
SCS, IHC |
Review: Fuzion Z300 Pro Complete Scooter
Published on Sun, 07/12/2015 - 1:36pm |
Fuzion, Z300, Complete, Scooter, Review, HIC, Integrated |
Ask ScooterDad: Hi, I have the first mgp scooter, it is black and I have customised it, but now I am deciding to get a new deck, I was wondering if you could tell me some decks that would fit these forks,
Published on Wed, 07/08/2015 - 9:57pm |
MGP, Madd Gear, Fork, Deck |
Ask ScooterDad: Hey, I have recently bought an scs compression system (everything fits ok with spacers) and i cant seem to screw the bolt from the top cap into the fork. im confuuused! Thanks in advance :)
Published on Fri, 07/03/2015 - 1:43am |
SCS, Compression |
Ask ScooterDad: Hi, I have an ethic artifact deck with the envy prodigy 2013 fork in it (Not sure what it's called), and I'm planing on buying a proto or tilt SCS but I'm not sure if my fork will work with SCS. Could you explain what I need to run SCS?
Published on Mon, 06/29/2015 - 6:22am |
SCS, IHC, Envy Prodigy |
Ask ScooterDad: Can you tie-dye White grip tape?
Published on Mon, 06/29/2015 - 1:22am |
Grip Tape |
Ask ScooterDad: what kind of clamp do u use with HIC
Published on Mon, 06/22/2015 - 11:39am |
HIC, Bars, Clamp, Oversized |
Ask ScooterDad: I'm Wondering If I Can Convert Standard Scooter Bars Into Oversized Bars. Is That Possible??
Published on Sun, 06/21/2015 - 7:28pm |
Bars, Oversized, Taper |
Ask ScooterDad: So im planning on building a scooter and these are the parts i picked envy aosv3 charles padel sig deck, fasen ihc fork, fasen headset, district helmer bars, district helmeri clamp are all these parts compatible?
Published on Sat, 06/20/2015 - 3:22pm |
Oversized, Aluminum, Bars, Clamp, IHC |
Ask ScooterDad: How do you know what kind of parts fit the parts that you want or have
Published on Thu, 06/18/2015 - 5:16pm |
Parts, Compatibility |
Ask ScooterDad: Can the downside bohemian fork use 110 mm wheels?
Published on Thu, 06/18/2015 - 1:52pm |
Downside, Bohemian, Fork, 110mm Wheels |
Ask ScooterDad: Can the envy aosv3 charles padel sig deck and the downside bohemian fork run scs compression?
Published on Thu, 06/18/2015 - 1:44pm |
SCS |
Ask ScooterDad: I have a mgp vx4 team and I want to upgrade my stock bars the one I want is oversized though and is there anything I can do to make them fit
Published on Tue, 06/09/2015 - 1:59pm |
HIC, MGP, Madd Gear, VX4 Team, Bars, Oversized |
Ask ScooterDad: I am looking for a scooter that is lightweight, durable and affordable under $200. Any suggestions?
Published on Sun, 06/07/2015 - 4:36am |
Envy, 5Starr, Colt, Prodigy, Sector5, Spectrum |
Ask ScooterDad: I got my hic compression system stuck in my bars. How do I get it out?
Published on Fri, 06/05/2015 - 7:21am |
HIC, Shim, Bars |
Ask ScooterDad: Hi scooterdad what should I get for my 8 year old the ultra pro or the ultra pro lo I want the scooter to last
Published on Thu, 06/04/2015 - 12:01pm |
Razor, Ultra Pro, Bars |
Ask ScooterDad: I've heard there are different types of bars im looking to buy a scooter (im 13 about to turn 14) and ive seen some scooter on 5starrscooters.com and some of them have different type of bars.What type of bars should I get on a scooter?
Published on Wed, 06/03/2015 - 9:37pm |
Bars, Oversized, Standard, SCS, ICS, IHC, HIC, Threaded |
Ask ScooterDad: What is a good upgrade from a 2014 Crisp Ultima? I'm thinking about buying the Blunt Prodigy s3 or a Phoenix Session 2
Published on Wed, 06/03/2015 - 9:35am |
Crisp, Ultima, Envy, Prodigy, Phoenix, Session |
Ask ScooterDad: Hi. my 9 yo can't decide between the z300 and the pro xxx. he's just starting out. can you give me your thoughts on these two? the indecision is killing him. thanks!
Published on Fri, 05/29/2015 - 6:19pm |
Fuzion, Z300, Razor, Pro XXX, HIC, Integrated, Threadless, Headset, Flex Brake |
Ask ScooterDad: how do you tail whip
Published on Thu, 05/28/2015 - 7:52pm |
tailwhip, trick, raymond warner |
Ask ScooterDad: I have threaded compression that comes stock on the Grit Fluxx, what parts do I need to change to go to SCS compression?
Published on Mon, 05/11/2015 - 5:12pm |
Grit, Fluxx, Threaded, Threadless, SCS |
Ask ScooterDad: ok so, i have lucky pro bars and a lucky X clamp all my lucky but my bars keep twisting and i get my clamp and HIC as tight as possible help?
Published on Mon, 05/11/2015 - 1:56pm |
Bars, Clamp, HIC |
Ask ScooterDad: We recently bought our 9 year old a Fuzion Z375. He wants to ride it to school. He previously didn't lock up his little Razor scooter, but we woukd like to find a way to lock up his Fuzion,
Published on Mon, 05/11/2015 - 6:06am |
Lock, Travel, Fork, Wheel |
Ask ScooterDad: lucky scooter headset is clicking when deck spins. 1. why? 2. what order to the headset pieces go in: I have a cap, 3 rings, 2 bearing systems.
Published on Thu, 05/07/2015 - 8:22am |
Headset, Bearing, Fork, Race, Compression, Headtube, Bars, Clamp |
Ask ScooterDad: I was wondering if i could take my pro scooter on a plane and how becuase i live in florida at my moma in the summer and i cant live without scoot!
Published on Fri, 05/01/2015 - 7:32pm |
Airplane, Airline, Flying, Travel |
Ask ScooterDad: Hi I have a vx2 team edition scooter and the bars on it are 22 high by 18 wide I'm VERY short about 4:11 and think I need to get new bars to make them smaller would 18 high be good? PS do smaller bars actually make flat riding easier?
Published on Sat, 04/18/2015 - 4:18pm |
Bars, Height |
Ask ScooterDad: Can you recommend a good scooter for an adult rider? I am 6' 199 lbs. I am really enjoying scootering with my sons but want to avoid wrecking their scooter (and me if they were to break) :)
Published on Mon, 04/13/2015 - 3:09am |
Dirt Scooter |
Ask ScooterDad: How long does a scooter fork have to be to run SCS?
Published on Thu, 04/02/2015 - 6:31pm |
SCS, Fork, Deck, Headtube, Headset Spacer |
Ask ScooterDad: Will I need spacers if I use a full size scs proto with a lucky smx fork?
Published on Sat, 03/28/2015 - 11:47am |
Lucky, SMX, Proto, SCS, Fork, Clamp, Headset, Spacer |
Ask ScooterDad: My daughter has a Razor XXX and she would like the handlebars to be a little taller. Is there a way to make them taller?
Published on Thu, 03/26/2015 - 2:36pm |
Bars, Razor, Pro XXX |
Ask ScooterDad: The spacers on my scooter are small what can I do to fix this?
Published on Thu, 03/19/2015 - 2:37pm |
Spacers, Headset, Wheels |
Ask ScooterDad: my cousin has a madd gear vx2 pro and he would like to know if he can put grit invader bars on it without changing anything else.
Published on Tue, 03/10/2015 - 7:59am |
Madd Gear, MGP, VX2 Pro, Grit, Invader, Bars, Threaded |
Ask ScooterDad: Hello, my son Matthew just bought a MGP VX4 Nitro Extreme. When trying to put the bar extensions in, the bar ends were stuck. They are standard bar ends (like sort of rubber not metal). Please help!
Published on Tue, 03/03/2015 - 2:32am |
Barend, Bars, Corkscrew, Drill, Drillbit |
Ask ScooterDad: Can you bend a 100mm mgp flex brake to fit a 110mm wheel ?
Published on Thu, 02/26/2015 - 8:21pm |
MGP, Madd Gear, Brake, 110mm Wheels, Wheels, 110mm, 100mm Wheels, 100mm, Flex Brake |
Ask ScooterDad: Is the Grit Invader 125mm the biggest complete scooter around? I am looking for something bigger--with taller bars and a wider deck. The Grit Invader 125mm looks interesting. Any other suggestions?
Published on Mon, 02/23/2015 - 7:59pm |
Large, Big, 125, Complete |
Ask ScooterDad: I am looking for a summer scooter camp in or near to Wis. I found your site through what appeares to be an old link from 2012. I am wondering if you could help with any info.
Published on Mon, 02/23/2015 - 6:33pm |
Camp, Lake Owen, Ohio Dreams, Woodward |
Ask ScooterDad: Should I get scooter pegs for my Lucky Crew 2014?
Published on Sun, 02/22/2015 - 7:01am |
Lucky, Crew, Pegs |
What's in Your Toolbox? - Presented by War Scooters
Published on Thu, 02/19/2015 - 3:36pm |
Toolbox, Tools, War Scooters |
Ask ScooterDad: I was wondering about traveling by plane could I take my scooter as carry on
Published on Wed, 02/18/2015 - 7:19pm |
Travel, Airplane, Luggage |
Ask ScooterDad: i am getting an ethic artefact deck and lucky voodoo bars. Will they be compatible with HIC forks?
Published on Mon, 02/16/2015 - 9:48am |
Fork, Bars, HIC, IHC, ICS, Threadless, Ethic, Lucky |
Ask ScooterDad: Hello, I have a non integrated scooter but want a new integrated deck and headset. Is there anything else that I need?
Published on Wed, 02/11/2015 - 10:18am |
Headset, Deck, Compression, Fork, Threaded, Threadless |
Ask ScooterDad: Besides buying a new headset and a new deck do I need anything to convert from non-integrated to integrated?
Published on Wed, 02/11/2015 - 9:58am |
Headset, Integrated, Non-integrated, Deck |
Ask ScooterDad: Grit Bars Compatible with Walmart MGP Scooter Pro?
Published on Sat, 02/07/2015 - 7:23pm |
Madd Gear, MGP, Walmart, Threaded, Headset, Fork, Bars |
Ask ScooterDad: Hello im 15 years old and i have currently been riding for 2 years now and i am started to become quite good at the sport. Is it possible to do scootering for a career if i get sponsered?
Published on Sun, 02/01/2015 - 8:52am |
Career, Job, Money, Success |
Ask ScooterDad: Who is the oldest scooter dad that you know of? I'm 48 and decent on my Reventon V2. I never see anyome my age riding and was wondering if there are others like me.
Published on Sat, 01/31/2015 - 8:25pm |
Dad, Age |
Ask ScooterDad: Hi I want to know if envy soul bars will fit on to my fasen raven
Published on Thu, 01/29/2015 - 3:05am |
Envy, Fasen, Raven, Soul, Bars, IHC |
Ask ScooterDad: Hi I have a fuzion pro x3 scooter and I was wondering how do you get the brake off?
Published on Tue, 01/27/2015 - 4:32pm |
Fuzion, Pro X3, Brake |
Ask ScooterDad: on a royal scooter can i replace the old brake with a flex brake?
Published on Thu, 01/15/2015 - 4:48pm |
Royal, Flex Fender, Switchblade, Brake |
Ask ScooterDad: Why are my girls Razor Pro XXX scooters slower than my Grit Tremor? Bearings?
Published on Thu, 01/15/2015 - 7:32am |
Wheels, Bearings, Razor, Pro XXX, Grit, Tremor, Fork |
Ask ScooterDad: Which peg is overall a better peg? The apex bowie or the tilt chromo
Published on Mon, 01/12/2015 - 2:02pm |
Tilt, Chromo, Pegs, Apex, Bowie |
Ask ScooterDad: I have sacrifice flyte 100 scooter and I cant put my district pegs on as bolts are too long how does it work
Published on Sun, 01/11/2015 - 9:21am |
Axle, Sacrifice, District, Peg |
Ask ScooterDad: if i have a phoenix complete with the black phase forks and if i raw them out will they still work
Published on Fri, 01/09/2015 - 7:56pm |
Fork, Raw, Phoenix Pro Scooters |
Ask ScooterDad: I would like to know if there are any other bars that will fit a fuzion
Published on Tue, 01/06/2015 - 7:43pm |
Bars, Oversized, HIC, Fuzion |
Ask ScooterDad: I have a fuzion pro x3 and I want to put Brandon James cut bars on my scooter will that work
Published on Tue, 01/06/2015 - 7:35pm |
Fuzion, Pro X3, Bars, District, Brandon James, HIC, Threaded |
Ask ScooterDad: How do I install SCS onto a District FK1Fork?
Published on Sat, 01/03/2015 - 8:33pm |
District, FK1, ICS, SCS, Fork |
Ask ScooterDad: Will the Madd Gear MGP Hot Head Alloy Threadless Fork fit on the AO DELTA scooter? If not will any other forks that fit?
Published on Thu, 01/01/2015 - 2:03pm |
HIC, AO Delta, Madd Gear, MGP, Fork, Compression |
Ask ScooterDad: i recently purchased a grit tremor and within weeks the bars started to wobble, is there any way to fix this without limiting how fast my deck can spin
Published on Thu, 01/01/2015 - 2:38am |
HIC, Grit, Tremor, Bars, Compression |
Ask ScooterDad: is it worth upgrading from a triple clamp to a quad clamp
Published on Thu, 01/01/2015 - 2:21am |
Clamp |
Ask ScooterDad: can an scs bennis bar fit ihc cyborg forks
Published on Wed, 12/31/2014 - 4:02pm |
SCS, IHC, Sacrifice, Bennis, Bars, Clamp, Fork |
Ask ScooterDad: Is there a possible way to make your scooter bars taller?
Published on Mon, 12/29/2014 - 7:11pm |
Bars, SCS |
Ask ScooterDad: i I have a 11.5 Wide shoe and ride park but do grind rails once in a while. I'm also 6'1 would a 22.5 by 4.75 deck be OK for park tricks park riding and occasional grinds?
Published on Sun, 12/28/2014 - 5:39pm |
Deck, Size, Park, Street |
Ask ScooterDad: Are there any scooter stores near Tulsa, oklahoma
Published on Sat, 12/27/2014 - 9:40pm |
Shop, Tulsa, Oklahoma |
Ask ScooterDad: Where can I buy a oversized integrated headset?
Published on Sun, 12/21/2014 - 6:47pm |
Headset, Bars, Oversized, Standard |
Ask ScooterDad: Am i too big to freestyle scooter? i played sports in the past and I'm a big strong guy but is there like a limit to where its almost impossible because of the scooter getting in the way? 6'0 240 pounds.
Published on Fri, 12/19/2014 - 11:05am |
|
Ask ScooterDad: How high should my bars be with scs? i mainly do park type tricks like bri's and whips and scooter flips and such and I'm 6foot? Thanks!
Published on Wed, 12/17/2014 - 7:11pm |
Bars, SCS, Height |
Ask ScooterDad: I have a lucky flex fender and the two bolts are stripped! What do I do?
Published on Fri, 12/12/2014 - 6:29pm |
Lucky, Brake, Flex Fender, Bolts |
Ask ScooterDad: Hey scooter dad I have hic compression but I want to switch to scs how do I do it do I just need to buy a scs clamp that can fit oversized bars
Published on Thu, 12/11/2014 - 7:19pm |
SCS, HIC, Bars |
Inward Scooters 6 Year Anniversary Sale - 10% Off Complete Scooters
Published on Wed, 12/10/2014 - 5:15pm |
Inward Scooters, Sale, Complete, Anniversary, Shipping |
Ask ScooterDad: what would you say is the best scooter for under 250 usd
Published on Fri, 12/05/2014 - 6:38pm |
Envy, Fasen, Raven, Prodigy, Lucky |
Ask ScooterDad: hi I have looked at getting my son a blazer scooter but he has now said that he wants a blunt scooter.could you tell me if there is any difference.
Published on Fri, 12/05/2014 - 12:24pm |
Blunt, Envy, Blazer |
Ask ScooterDad: is there any thing else I need.to upgrade if Im just uprading my bar
Published on Thu, 12/04/2014 - 4:19pm |
Bars |
Ask ScooterDad: i want to switch wheels on my scooter but i cant because the front wheel axle is stripped...what do i do?
Published on Wed, 12/03/2014 - 6:33am |
Axle, Wheel |
Ask ScooterDad: want to put apex bars on new scooter how do I do that ? also to do a full custom scooter up can you list all parts needed in doing this ?
Published on Mon, 12/01/2014 - 7:40pm |
Bars, Custom, Complete, Scooter, Parts |
Ask ScooterDad: I recently bought a district custom scooter secondhand and I can't get the clamp off, tried with Allen keys won't do anything they seem stuck on, how do I take them off ?
Published on Mon, 12/01/2014 - 7:36pm |
Clamp, Bolts, District |
Ask ScooterDad: My son who is 13 has a fear of doing bunny hops? he tries and only gets maybe 3 inches off the ground and is scared to go any higher. idk if you answer questions like this but do you have any tips for him?
Published on Mon, 12/01/2014 - 8:30am |
Fear, Tricks, Bunny Hop |
Ask ScooterDad: What clamp do you use with ihc compression.
Published on Sun, 11/30/2014 - 9:37pm |
IHC, Clamp, Bars |
Ask ScooterDad: Whats the difference between a " Grit CX I Series and a Atom pro scooter. Is there any model close to the Grit CX I but more affordable?
Published on Sun, 11/30/2014 - 11:58am |
Grit, Atom, CX I, Threadless, Metal Core, Wheels, Headset, Bars, HIC |
Ask ScooterDad: I have an Envy prodigy,I know that it is ihc compresion. I am looking into flavor awakening bars. Does that mean that I should get standard size? I'm not quite sure what size ihc is?
Published on Sun, 11/23/2014 - 1:45pm |
Bars, IHC, Envy, Flavor |
Ask ScooterDad: My son has Grit forks and the wheel slides back and forth. Am I missing a spacer or is there a specific wheel size? Im stuck......
Published on Fri, 11/21/2014 - 8:31pm |
Fork, Grit, Spacers, Wheels |
Win a Holiday Scooter Prize Pack from Gryndo Scooters
Published on Wed, 11/19/2014 - 10:51pm |
Gryndo, Contest, Win, Prize |
Ask ScooterDad: will apex hic bars fit a blazer pro scs clamp
Published on Sun, 11/16/2014 - 8:35am |
SCS, Oversized, HIC, Apex, Blazer |
Ask ScooterDad: My son has an MGP scooter. We tried to replace the grips but had great difficulty removing the end caps on the bars. Are they screwed in? Any suggestions on removing them would be appreciated
Published on Thu, 11/13/2014 - 6:49pm |
Bar Ends, Bars, Grips |
Ask ScooterDad: i want too take my clamp off but i cant because the bolt is rounded. what shall i do?
Published on Thu, 11/13/2014 - 9:57am |
Bolt, Clamp, Screwdriver, Vice Grips |
Ask ScooterDad: Hello, wondering how to fit my 6 year old on a solid pro-type scooter. I've got my eyes on a Razor Black Label which is labelled 21" tall. You mentioned cutting the bars to fit. Is this done professionally?
Published on Mon, 11/10/2014 - 9:47pm |
Bars, Razor |
Ask ScooterDad: Whenever I try to tail whip on my grit flux I can't because the deck doesn't spin fast enough. How can I make it spin faster?
Published on Fri, 11/07/2014 - 11:04am |
Headset, Threaded |
Ask ScooterDad: I want to buy a district brake (one that slide in your deck and isnt a flex) but not sure if it fits my MGP team edition deck
Published on Sat, 11/01/2014 - 11:48am |
Brake, MGP, District, Madd Gear |
Ask ScooterDad: Can i use hic bars with scs?
Published on Thu, 10/30/2014 - 9:40pm |
SCS, HIC, Oversized, Bars, Clamp |
Ask ScooterDad: Looking for trick scooter for grandson. metal core wheels, threadless headset,threadless forks,and flex brake. Where can I buy this?
Published on Fri, 10/24/2014 - 3:52pm |
Retailer, Inward Scooters |
Ask ScooterDad: i bought a brand new threadless sealed headset with cups and i put the cups and bearings in and now the bearings wont come out do you now how to get them out without snappingthe bearing case?
Published on Thu, 10/23/2014 - 1:23pm |
Bearings, Headset, Cups, Threadless |
Ask ScooterDad: My son wants to get the brandon James sig bars and use a tilt scs but doesn't want to cut the slit off to lose height, what else can we do?
Published on Wed, 10/15/2014 - 6:39pm |
Bars, Slit, SCS |
Ask ScooterDad: we have a District Hell mary Deck, a new Tilt head set, a New 4 bolt Envy clamp and his old Sacrifice Cyborg Forks.Upon assembly the headset does not stay snug,do you have a reccomendation?
Published on Fri, 10/10/2014 - 1:28pm |
SCS, ICS, Compression |
Ask ScooterDad: What kind of bars would I use I have a threaded headset so would I use oversized bars or what?
Published on Mon, 09/29/2014 - 4:32pm |
Bars, Threaded, Fork, Headset |
Ask ScooterDad: will urban art dawg hic bars fit vx2 deck with hic
Published on Sun, 09/28/2014 - 12:31am |
HIC, Bars, Deck, Fork, VX2, Madd Gear, MGP |
Ask ScooterDad: Is the Phoenix session 4.25 good for me I'm a 180 pound rider just starting to scoot, what do you guys recommend
Published on Sat, 09/27/2014 - 7:57am |
Phoenix, Session, Envy, Prodigy, Fasen |
Ask ScooterDad: I bought some metal wheels for my daughter's MGP scooter, and she liked them, but I failed to use loctite on the rear axle, and the screw backed out. Result is a lost screw, and one outside spacer. Where can I get a replacement spacer?
Published on Wed, 09/24/2014 - 6:09pm |
Madd Gear, MGP, Axles, Hardware, Inward Scooters |
Ask ScooterDad: Are there extensions to make the headset taller?
Published on Tue, 09/23/2014 - 6:52pm |
|
Ask ScooterDad: My sons mgp scooter is only 2 months old but the deck at the rear wheel is cracked from sliding along curbs is this normal. He uses it everyday.
Published on Mon, 09/22/2014 - 9:04pm |
Grinding, MGP |
Ask ScooterDad: Do any major skate shoe companies sponsor pro scooter riders?
Published on Mon, 09/22/2014 - 5:38pm |
Shoes, Sponsor, Elyts |
Ask ScooterDad: how can I get broken scooter headset rings out of a integrated deck
Published on Sun, 09/21/2014 - 8:10pm |
Headset, Bearings |
Ask ScooterDad: My clamp is super tight but my bars get out of alignment with my wheel really easy how can I fix this?
Published on Sun, 09/21/2014 - 1:30pm |
Clamp, Bars, Slipping, Pop Can, Shim |
Ask ScooterDad: Hey i have ethic legion forks and i am running scs with a district clamp and it keeps coming lose after every session of scootering and i tighten it as much as possible each time so i dont know why it keeps coming lose! Please help
Published on Thu, 09/18/2014 - 3:47pm |
SCS, ICS, Ethic, Legion, District |
Ask ScooterDad: I have an ethic legion fork and I am trying to run hic which I think is the right compression to use anyway I was wondering if you can run hic without a shim because if I used a shim my bars wouldn't fit.
Published on Tue, 09/16/2014 - 10:55am |
HIC, Bars, Fork |
The Vault Pro Scooters - The Kick Scooter: The Ride of The 21st Century
Published on Sat, 09/06/2014 - 1:32am |
Scooter, History, Infographic, The Vault, Video Game, Razor |
Gryndo Scooters Promo - Win a Pair of Tilt Blaster Wheels
Published on Mon, 06/02/2014 - 9:22pm |
Gryndo, Tilt, Wheels, Promo, Contest |
ISA Pro/AM National Scooter Qualifier - Allen, TX - May 31, 2014
Published on Thu, 05/08/2014 - 9:25pm |
ISA, Competition, Inward Scooters |
Borchard Community Skatepark - Summer Contest Series - Newbury Park, CA
Published on Wed, 05/07/2014 - 8:40pm |
Competition, Series |
The Best Trick: Scootering as Therapy for Autism Spectrum Disorders
Published on Tue, 12/03/2013 - 9:50pm |
Aspergers Syndrome, Aspergers, Autism, Autism Spectrum Disorder, Sensory Input, Sensory Integration Disorder, Occupational Therapy, Social Interaction, Focus, Attention |
East Coast Scooter Federation Series Final at The Incline Club on December 14
Published on Tue, 12/03/2013 - 11:10am |
Competition, The Incline Club, New Jersey, Inward Scooters |
Scootober-Fest at Escondido Skate Park on Saturday, October 26, 2013
Published on Wed, 10/16/2013 - 4:04pm |
Competition, Escondido, Scootober-Fest |
FixJonsKnee.com - Fundraiser Raffle to Help Jon Reyes with Knee Surgery - Win an Elyts Prize Pack
Published on Thu, 09/05/2013 - 4:03pm |
Jon Reyes, Elyts, Fundraiser, Raffle |
Cootercon 2013 Competition - Saturday, August 31st at Windells in Sandy, OR
Published on Tue, 08/20/2013 - 2:44pm |
Cootercon, Competition, Windells |
Fuzion JumpX Giveaway - Presented By Fuzion Scooters and ScooterDad
Published on Thu, 08/01/2013 - 1:13am |
Fuzion, JumpX, Giveaway, Prize, Contest |
2013 Madd Gear Freestyle Masters North American Tour - US West Coast, US East Coast, & Ontario, Canada
Published on Sun, 07/21/2013 - 11:37pm |
Madd Gear, Tour, North America, West Coast, East Coast, Canada, Ontario |
6th Annual Subway Washington Games Competition in Mukilteo, WA on Saturday, July 20, 2013
Published on Thu, 07/18/2013 - 1:46am |
Competition, Subway Games, Mothership Distribution |
Madd Gear 2013 Florida Pro Scooter Tour - June 15 - 23, 2013
Published on Mon, 06/10/2013 - 9:54pm |
Madd Gear, Tour, Florida |
FixJonsKnee.com - Fundraiser Raffle to Help Jon Reyes with Knee Surgery - Win a Jon Reyes Reventon
Published on Fri, 05/03/2013 - 10:08am |
Jon Reyes, Phoenix Pro Scooters, Fundraiser, Raffle, Reventon |
Race to Recover Fundraiser - Buy a Reventon and Help Phoenix Pro Scooters Rider Jon Reyes with Knee Surgery
Published on Tue, 04/30/2013 - 11:13pm |
Phoenix Pro Scooters, Jon Reyes, Reventon, Fundraiser, Knee Injury, ACL |
Epic Indoor Skatepark 2013 Spring Scoot Comp Street Jam & Best Trick in Rocklin, CA on March 23 & 24, 2013
Published on Tue, 03/05/2013 - 3:42pm |
Competition, Epic Indoor Skatepark, Street Jam, Best Trick |
Dead Of Winter Scooter Jam 2013 in Philadelphia, PA on February 23, 2013
Published on Tue, 02/05/2013 - 2:07am |
Competition, Inward Scooters, Barking Spyder, Dead Of Winter, Scooter Jam |
Shred The South Scooter Jam in Lufkin, TX on February 23, 2013
Published on Thu, 01/31/2013 - 4:21pm |
Competition, Inward Scooters, Texas, Scooter Jam |
Rubicon Scooter Camp - February 18 - 22, UK
Published on Fri, 12/14/2012 - 10:26am |
Camp, Rubicon, UK |
Phoenix Switchblade Installation on non-Phoenix Decks
Published on Thu, 12/06/2012 - 9:20am |
Phoenix Pro Scooters, Phoenix Switchblade, Switchblade, Brake, Install, Flex Fender, Dial |
Aura Skatepark Lock-In Hosted by 5Starr Scooters - December 7, 2012
Published on Wed, 11/14/2012 - 9:55pm |
Lock-In, 5Starr, Aura Skatepark |
ScootAm.com - Promoting Freestyle Scooter Amateurs
Published on Fri, 11/02/2012 - 12:27am |
Promotion, Video, Photography, Announcement, ScootAm |
Epic Indoor Scoot Comp - October 20th, 2012 in Rocklin, CA
Published on Tue, 10/16/2012 - 11:47pm |
Competition |
The Endless Summer Scooter Comp - September 20th, 2012 in Philadelphia, PA
Published on Mon, 09/24/2012 - 11:36pm |
Competition, Inward Scooters |
Scooter Configurator - New Feature to Help Determine Scooter Parts Compatibility
Published on Mon, 09/10/2012 - 11:49pm |
Parts, Configurator, Configure, Compatibility, Headset, Bars, Fork, Clamp, Compression |
Why You Should Always Wear a Helmet When Riding a Freestyle Scooter
Published on Wed, 08/22/2012 - 11:40pm |
Helmet, Safety, Injury |
Ask ScooterDad - Volume 4
Published on Mon, 08/13/2012 - 1:13am |
Ask, Question, FAQ |
Tricks That Win Freestyle Scooter Competitions
Published on Sun, 07/22/2012 - 11:08pm |
Competition, Tricks |
5th Annual Subway Washington Games Competition in Mukilteo, WA on Saturday, July 14, 2012
Published on Tue, 07/03/2012 - 12:03am |
Competition, Subway Games, Mothership Distribution |
RDM Summer Classic in Redmond, OR on Saturday, August 4th, 2012
Published on Fri, 06/29/2012 - 11:29pm |
Competition, Phoenix Pro Scooters, RDM Summer Classic, Redmond, Northwest |
Madd Gear Deep West Tour - Summer 2012
Published on Tue, 06/19/2012 - 11:11pm |
Tour, Madd Gear |
Paxton Swygard in "Scoot To Thrill - 2011" Part 4 of 4
Published on Fri, 06/01/2012 - 12:41am |
Paxton Swygard, Video |
Paxton Swygard in "Scoot To Thrill - 2011" Part 3 of 4
Published on Fri, 05/25/2012 - 12:46am |
Paxton Swygard, Video |
Paxton Swygard in "Scoot To Thrill - 2011" Part 2 of 4
Published on Fri, 05/18/2012 - 12:12am |
Paxton Swygard, Video |
Petition to Keep Scooters in California Skate Parks
Published on Thu, 05/17/2012 - 10:21pm |
Activism |
Paxton Swygard in "Scoot To Thrill - 2011" Part 1 of 4
Published on Fri, 05/11/2012 - 1:13am |
Paxton Swygard, Video |
Woodward, PA - Scooter Fest Hosted at Woodward - August 19 - 26
Published on Thu, 05/10/2012 - 12:00am |
Woodward, Camp |
Lake Owen, WI - Scooter Camp Hosted at Woodward, July 29 - August 4
Published on Sun, 05/06/2012 - 2:37am |
Woodward, Camp |
Scooter Sponsorship and Success - A Chicken and Egg Problem
Published on Tue, 04/17/2012 - 10:39pm |
Sponsor, Sponsorship |
Cootercon 2012 Competition - Saturday, April 28th at Windells in Sandy, OR
Published on Sat, 04/14/2012 - 1:38am |
Cootercon, Competition, Windells |
Scooter Camp for Kids in the UK
Published on Thu, 03/29/2012 - 12:47am |
Camp, Europe |
Ripzu Junior Jam Pre-Registration Now Open
Published on Thu, 03/15/2012 - 12:46am |
Competition, Event, NW Scoot, Ripzu, Junior Jam |
Razor Global Domination Tour 2012 Announcement
Published on Mon, 03/12/2012 - 10:09pm |
Razor, Competition, Tour |
What NOT to Do in Scooter Videos
Published on Fri, 03/09/2012 - 1:32am |
Video, Filming |
ScooterDad Scoot Loot Store Officially Open
Published on Sat, 02/25/2012 - 9:52pm |
Scoot Loot, Gear, Bracelet, Necklace, Dog Tag, Key Chain, Bandana, Lanyard |
Ripzu Junior Jam - 12 and Under Competition on April 1st in Vancouver, WA
Published on Wed, 02/15/2012 - 1:30am |
Competition, Event, NW Scoot, Ripzu, Junior Jam |
Woodward Scooter Camp - Registration Update and Scholarship Nomination
Published on Tue, 01/31/2012 - 10:30pm |
Woodward, Camp |
Ask ScooterDad - Volume 3
Published on Mon, 01/30/2012 - 12:26am |
Ask, Question, FAQ |
Lucky HIC Installation
Published on Tue, 01/17/2012 - 1:29am |
Clamp, Lucky, HIC, Compression, Parts |
110% Clothing Video Clip Contest
Published on Tue, 01/03/2012 - 9:10pm |
Contest, Video |
Proto SCS Installation
Published on Thu, 12/29/2011 - 1:57am |
Clamp, Proto, SCS, Compression, Parts |
New ScooterDad Scoot Loot - "Haters Gonna Hate - Scooters Gonna Scoot" Lanyards
Published on Sun, 12/11/2011 - 12:06am |
Scoot Loot, Gear, Lanyard |
Scoot Loot T-Shirt Voting - You Help Us Choose
Published on Fri, 12/09/2011 - 11:41pm |
Scoot Loot, Gear, T-Shirt, Shirt, Clothing, Vote |
Creative Filming with Interesting Angles
Published on Wed, 12/07/2011 - 11:23am |
Video, Filming |
CANCELED: 2011 NW Scoot Christmas Classic Competition
Published on Sun, 11/27/2011 - 7:47pm |
Competition, Event, Phoenix Pro Scooters, NW Scoot, Christmas Classic, Skate Barn |
Inward Scooters Supports ScooterDad with Magnets and Flyers
Published on Sat, 11/26/2011 - 1:02am |
Inward Scooters, Magnet, Flyer |
Woodward Scooter Camp Update - Special Guests Announced
Published on Mon, 11/21/2011 - 2:49pm |
Woodward, Camp |
Woodward Scooter Camp Update - Sponsors and Registration
Published on Fri, 11/18/2011 - 10:45pm |
Woodward, Camp |
Clamp Expansion with the Penny Trick
Published on Wed, 11/16/2011 - 1:34am |
Clamp, Bars, Parts |
Removing Bearings from Metal Core Wheels
Published on Sun, 11/06/2011 - 1:34am |
Wheel, Bearings, Parts |
Introducing ScooterDad Scoot Loot!
Published on Wed, 11/02/2011 - 8:41pm |
Scoot Loot, Gear, Bracelet, Necklace, Dog Tag, Key Chain, Bandana |
Ask ScooterDad - Volume 2
Published on Fri, 10/28/2011 - 10:51pm |
Ask, Question, FAQ |
NW Scoot Christmas Classic Competition in Renton, WA on Saturday, December 17th, 2011
Published on Wed, 10/19/2011 - 1:05am |
Competition, Event, Phoenix Pro Scooters, NW Scoot, Christmas Classic, Skate Barn |
Ask ScooterDad - Volume 1
Published on Sat, 10/08/2011 - 12:54am |
Ask, Question, FAQ |
Installing Scooter Grips Easily with an Air Compressor
Published on Wed, 09/28/2011 - 2:36am |
Grips, Bars, Parts |
Woodward Scooter Camp - February 17-20, 2012
Published on Sat, 09/24/2011 - 10:20pm |
Woodward, Camp |
Skate Park Etiquette for Scooter Kids
Published on Wed, 09/21/2011 - 4:57pm |
Etiquette, Culture, Skate Park, Safety |
Scooter Lingo - Volume 2
Published on Sun, 09/18/2011 - 3:20am |
Lingo, Terminology, Culture |
Interview with Justin Wharton of JJW Designs and 110% Clothing
Published on Thu, 09/08/2011 - 10:42am |
Interview, Street, Park, Sponsorship, Competition |
Inward Scooters Presents Scooter Dad
Published on Wed, 09/07/2011 - 5:01pm |
Inward Scooters, Razor, Phoenix Pro Scooters, Madd Gear, District, Blunt, Retailer, Parts |
What are the Basic Parts of a Scooter?
Published on Sat, 09/03/2011 - 11:11pm |
Parts, Deck, Bars, Wheel, Fork, Brake, Clamp |
Your Scooter Kid Should Wear a Mouth Guard and Here's Why
Published on Thu, 08/25/2011 - 2:39am |
Gear, Protection, Injury, Mouth Guard |
Scooter Lingo - Volume 1
Published on Wed, 08/17/2011 - 11:46pm |
Lingo, Terminology, Culture |
Removing Flat Spots and Resurfacing Scooter Wheels
Published on Mon, 08/08/2011 - 2:13am |
Wheel, Brake, Parts |
New ScooterDad Stickers
Published on Thu, 08/04/2011 - 11:00pm |
Sticker |
Inward Scooters and Phoenix Pro Scooters Northwest Tour 2011
Published on Tue, 08/02/2011 - 3:20pm |
Inward Scooters, Phoenix Pro Scooters, Reventon, Tour, Impact Scooter News, Inside Scooters |
Scooter Customization on the Cheap - Creative Grip Tape
Published on Mon, 08/01/2011 - 1:38am |
Grip Tape, Deck, Upgrade, Customize, Parts |
Swap Meet - Frequent Part Swapping in Scooter Culture
Published on Fri, 07/29/2011 - 3:51pm |
Parts, Culture, Upgrade |
When Should You Upgrade to a Pro Scooter?
Published on Tue, 07/26/2011 - 1:42am |
Razor, Bolty, Ultra Pro, Foldy |
Tips for Installing Wheel Bearings
Published on Wed, 07/20/2011 - 1:00am |
Bearings, Wheel, Spacer, Parts |
Lucky Scooter Parts Presents: Summer Blow Out NW Tour
Published on Tue, 07/19/2011 - 2:13pm |
Lucky, Tour, Sponsor, Lil Lucky, Pro |
Where to Go For Freestyle Scooter News and Information on the Web
Published on Mon, 07/18/2011 - 4:47pm |
News, Blogs, Event, Review, Impact Scooter News, Inside Scooters, Scooter Resource |
Dialing a District V2's Brake
Published on Fri, 07/15/2011 - 1:33am |
Dial, District, Brake, Deck, Parts |
UPDATE: Moved to Skate Barn in Renton - Subway Games - Saturday, July 15th
Published on Thu, 07/14/2011 - 12:29am |
Skate Barn, Competition, Subway Games |
Your First Comp, Part 2 - What to Expect at a Freestyle Scooter Competition
Published on Wed, 07/13/2011 - 10:49am |
Event, Competition, Preparing |
Your First Comp, Part 1 - Preparing for a Freestyle Scooter Competition
Published on Tue, 07/12/2011 - 11:49pm |
Event, Competition, Preparing |
Welcome to ScooterDad.com!
Published on Thu, 07/07/2011 - 11:54pm |
|
